Utilise All Inverter input with different orientations

[Asyraf]

Hi all,

Need help on this. I'm currently trying to simulate the generation difference by:

1. Connect 2 different orientations in a string using 1 MPPT

2. Connect 2 different orientations using different input under same MPPT

 

I'm stuck at number 2 as unable/not sure to set the parameters under "system"

 

Below are the specs for the simulation.

Inverter: Solis S5-GR3P12K (2 MPPT 4 Inputs)

Panel: JA 590W

 

Test 1:

MPPT 1

Input 1: 10 panels facing North

Input 2: -

 

MPPT 2

Input 1: 20 panels (East + South)

Input 2: -

 

 

Test 2:

MPPT 1

Input 1: 10 panels facing North

Input 2: -

 

MPPT 2

Input 1: 10 panels facing East 

Input 2: 10 panels facing South

 

Thanks for the support and advice in advance

[Linda Thoren]

Hello,

It is not possible to mix orientations in a string. It is possible to mix orientation in an MPPT, given that there is at least one string in each orientation.
You find more information about this in the following PVsyst help:
https://www.pvsyst.com/help/project-design/orientations-in-v8/mixed-orientations.html

It is not possible in PVsyst to have empty MPPT inputs.