Michalis Angeli Posted August 21, 2023 Share Posted August 21, 2023 I have a project that has orientation unlimited shades, i would like to ask, if it is nesecary to check the option use electrical effect in simulation, and i would like to explain me what are these parameters. Thank you! Link to comment Share on other sites More sharing options...
Michele Oliosi Posted August 22, 2023 Share Posted August 22, 2023 Hi, yeah, it is recommended to use the electrical effect functionality. Indeed, it is only with it that you can fully take into account the effects of shadings and mismatch caused by shadings. The width of the PV cell should be the width in the height of the table. For example, for an 9 cm by 18 cm cell, in a half-cut module in portrait, the relevant height is 9 cm. The number of modules is an old name for this parameter. Now it is best read as “number of partitions in the height of the table”. https://www.pvsyst.com/help/shadings_partitioninstrings.htm Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now