[More than 8 orientation, and cause error after imported 3d scene into pvsyst]

Hi Everyone,

I have a project where the installed capacity is about 3.5MWp. In my design I used CSI 655W PV module.

I built the 3D model of my project using sketchup + skelion.

the following is my face result generate by skelion basic report:-

As you can see I have more than 8 different orientation in my case.

After I exported the 3d model from sketchup and imported it to pvsyst...

PVsyst said more than 2188 nos PV module don't have orientation... i believe it is because PVsyst only can add up to 8 orientation right?

In this case, how do i result the issue ya?

Thanks for advice, I am new in PVsyst.... 

 

[Inverter that can connect multiple string per MPPT]

I see.. thanks for the reply..

[Inverter that can connect multiple string per MPPT]

Hi All,

I'm new in Pvsyst.

Say I would like to simulate a PV System that use Huawei SUN2000-36KTL-M3 Inverter.

This inverter has 4 number of MPPT, and 8 number of Input. Meaning that each MPPT can connect 2 strings.

I would like to know how to let PVsyst know that I'm connecting 2 string to a MPPT instead of connecting it to 2 separate MPPT?

Or how do i make the said configuration in PVsyst?

thanks in advance for advise.