Jonny2993 Posted January 17, 2015 Share Posted January 17, 2015 Hi i have a PV design that needs to have a reflective surface. I was wondering if it was possible to have a reflective material in the PVsyst software so i can have a more accurate system sizing. just so you know i have a very basic knowledge of PVsyst so the more detail you can include the better. any help you can give i will be extreamly grateful.Many thanks Jonathan Ebdy Link to comment Share on other sites More sharing options...
André Mermoud Posted January 18, 2015 Share Posted January 18, 2015 Sorry, this is not possible in PVsyst. This would be very difficult to manage reflexions in a general way, as these are highly dependent on the geometry, the incidence irradiance and the surface's reflexion properties. By the way please remember that in a string of modules, the current of the worst cell drives the current of the whole string. Therefore if you don't have a perfect uniformity on at least one string area, you won't gain anything. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now