Measured I-V curve on .PAN file

[JGM]

Hi,

I am triying to include some additional information on a PAN file from a measured I-V data @STC (1000 W/m2, 25ºC).

I would like to confirm one of the following points:

• Is it possible to save the imported measured I-V Curve data on the PAN?
  • I tried several time to save the information but each time I save the file, this graph shows no data at all.

Or:

• Is this "Measured I-V Curve" an educational tool to estimate Rsh & Rs of the PV module and no I-V curve information will be save on the PAN file?

 

In any case, which shall be the best way to use this "measured I-V curve" to reestimate the Rsh and Rs?

• 10 points considering from Isc up to Voc?
  • Or
• 10 points considering from Isc up to Pmpp?
  • Or
•  10 points considering from Isc up to an intermedian Point between Isc and Pmpp?

Thanks in advance,

[JGM]

I don't why I posted this question on "suggestions forum", it shall be on "PV components" may be.

My bad.