The axis tilt difference is to high - Tracking system

[Douglas_L]

I got this error importing a 3D-scene from Helios. This is a new error and i don't understand the cause. How can this be fixed in able to simulate?

 

[Stéphane]

Dear Douglas,

To get rid of the error message, you can go to the advanced parameters (menu “Settings > Edit advanced parameters” from PVsyst first window), search for “spread” and modify the following value:

Please keep in mind that the default value is 4° so increasing it can lead to results that are not entirely accurate, but at least you will be able to run the simulation.

[kennyyan]

On 3/13/2024 at 7:10 PM, Stéphane said:

Dear Douglas,

To get rid of the error message, you can go to the advanced parameters (menu “Settings > Edit advanced parameters” from PVsyst first window), search for “spread” and modify the following value:

Please keep in mind that the default value is 4° so increasing it can lead to results that are not entirely accurate, but at least you will be able to run the simulation.

Hello, will this have impact on the result? I also have the problem when inputing the dae file, N-S tracker 3D model into the pvsyst, selecting N-S type, but still software show tilted axis in the model, same in the report. Any steps i was wrong?