Jump to content

Structure Shading Factor for Bifacial Modules being used with Fixed Tilt racking system in Portrait Orientation


Shivya

Recommended Posts

NMMS GA 2.pdfMMS GA 2.pdfeed your guidance in ascertaining Structure Shading Factor for Bifacial Modules being used with Fixed Tilt racking system in Portrait Orientation. Arrangement shown in the pic below. 
 
This would have two mounting rails (pink color) running across the module width, thereby crossing all the internal strings of the module. Mounting rail and back side cells will have typical separation gap of 35-40mm (module frame thickness). 
 
Following are our specific queries:
  1. What should be the Structure Shading Factor to be considered for above arrangement
  2. What would be the correct interpretation of the mechanics covering half a cell or full cell in the above design

MMS.png

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...