e grid in 10 min steps

[BYES_DEV]

Hello,

is it possible to set the output file format to have the "e_grid" values in 10 minutes version instead of 1 hour (please) ?

Thank you

[dtarin]

The software can only output hourly values. 

[André Mermoud]

Basically, in the present time, PVsyst works in hourly steps. Therefore this is not possible.

By the way, providing 10 min output data would require to avail of 10-minutes meteo data  (irradiance and temperature). 

[Pozzatti]

On 9/26/2022 at 8:50 AM, André Mermoud said:

Basically, in the present time, PVsyst works in hourly steps. Therefore this is not possible.

By the way, providing 10 min output data would require to avail of 10-minutes meteo data  (irradiance and temperature). 

Hi, André!

Will PVSyst implement this possibility of 10-minute outputs in the near future? For an appropriate evaluation of hybrid/associated wind-photovoltaic projects, it is fundamental to have the maximum granularity possible in data to mitigate the errors of complementary between technologies. We already measure and store climatic data in 10-minute steps, so it would be of great to have PVsyst providing outputs of power in the same intervals. 

[André Mermoud]

This is on our roadmap.

But it involves a very deep change in PVsyst, we will not find possibilities to develop this before probably more than one year.