Etienne Guerin Posted February 4, 2020 Share Posted February 4, 2020 Hello,In order to evaluate selfconsumption optimisation, I would like to simulate the shifting of energy consumptions for water heating using a control system like the Ohmpilot from Fronius.Currently, the home owner has a water heating tube with a capacity of 200L and heating power of 2500W.I am considering using the Grid-storage function from PVsyst for this simulation. I am, however, unsure about battery parameters to set ...Your help would be much welcome ! :)Thank you in advance. Link to comment Share on other sites More sharing options...
André Mermoud Posted March 4, 2020 Share Posted March 4, 2020 Yes, you can define a "normal" system with self-consumption and storage, and consider the energy injected into the grid as the heating energy of the hotwater tank. The battery sizing is completely dependent on your requirements (load profile, PV power and required self-consumption). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now