Jump to content

Search the Community

Showing results for tags 'losses'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • PVsyst SA Announcements (read only)
    • Latest news
  • FAQ (read only)
    • Installation and use of PVsyst
    • Meteo data
    • PV Components
    • Shadings and tracking
    • Simulations : parameters
    • Simulations : results
    • Standalone and pumping systems
  • Your questions about PVsyst
    • How-to
    • Problems / Bugs
    • Meteo data
    • PV Components
    • Shadings and tracking
    • Simulations
    • Suggestions
  • Your questions about PVsystCLI
    • How-to
    • Problems / Bugs
    • Suggestions

Calendars

  • Community Calendar

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


About Me

Found 4 results

  1. I want to design a solar system (15.48 KW =36 Modules x 430 w per module) on two roof (28 panels on one roof and 8 on other) having tilt angle of 30 and 20 degree respectively at location of 41°18'06.0"N 0°59'17.8"E. I selected Pv module of 430 W and a hybrid inverter (8KW) of Fronius_Symo_Gen24_8_0_Plus.OND (Fronius International) having 2 MMPT inputs. During Design, I configured 18 module in series for 1 inverters and the same for other. Each inverter have 2 MPPT so i have following confusions. 1. Do i need to configure 4 strings (each of 9 module in series) with 1 string for each MPPT or to connect 18 module with one mppt? (Please review snap) 2. Location is Northern hemisphere, so panel should be faced towards south having azimuth angle of 180 degree. But when i select 180 degree, Loss due to Optimum goes upto 42% (snap attached) while it comes 10% when azimuth angle of 0 degree. Why it is happening? 3. What will be azimuth angle in my configuration ? 4. What can be the best configurations ( No of strings and MPPT inverter)? Valuable Expert opinion and prompt response will be highly appreciated, please.. 3.
  2. I want to design a solar system (15.48 KW =36 Modules x 430 w per module) on two roof (28 panels on one roof and 8 on other) having tilt angle of 30 and 20 degree respectively at location of 41°18'06.0"N 0°59'17.8"E. I selected Pv module of 430 W and a hybrid inverter (8KW) of Fronius_Symo_Gen24_8_0_Plus.OND (Fronius International) having 2 MMPT inputs. During Design, I configured 18 module in series for 1 inverters and the same for other. Each inverter have 2 MPPT so i have following confusions. 1. Do i need to configure 4 strings (each of 9 module in series) with 1 string for each MPPT or to connect 18 module with one mppt? (Please review snap) 2. Location is Northern hemisphere, so panel should be faced towards south having azimuth angle of 180 degree. But when i select 180 degree, Loss due to Optimum goes upto 42% (snap attached) while it comes 10% when azimuth angle of 0 degree. Why it is happening? 3. What will be azimuth angle in my configuration ? 4. What can be the best configurations ( No of strings and MPPT inverter)? Valuable Expert opinion and prompt response will be highly appreciated, please.. 3.
  3. Can we have the option to input or limit AC ohmic losses and MV losses to a certain percentage? Example- In below attached snip, we always try to limit the Auxiliaries to 0.15% and AC ohmic and MV transfo losses to 1% for every project or varient. We have to run multiple simulations while changing the values in Detailed losses section.
  4. Hi, everyone. I'm trying to simulate a Grid Connected PV Plant, but I need the PR results in the report without PV Losses due to temperature. How can I indicate PVsyst not to calculate these losses and have an ideal PR with all temperatures equal to 25ºC (STC).
×
×
  • Create New...