SteveL

I am having the same issue. EDIT: Ah, I see it was addressed here http://forum.pvsyst.com/viewtopic.php?f=25&t=3236&p=8216&hilit=iam+6.67#p8216

To expand on the previous, I am also confused as to how the Pac is calculated in the "AC Circuit:" inverter to injection point". The value that is shown does not match the nameplating rating of the inverter or the STC value of the solar array. Changing the DC value changes this Pac, and changing the inverter quantity changes it slightly. There doesn't seem to be a solid correlation, just that the Pac is roughly 2-3% of DC kW at STC

Hi, We're trying to write a VBA program that can read the output from the simulation by looking at the simulation VC# file. It looks like the output data is stored hourly for the day. And that the numbers are stored in base 62. Is that correct? Would we take VarSimlu_83=-E_Grid then for energy injected into the grid? Thanks

Hello PVsyst, I've just recently updated to version 6.41. I'll do a simulation, and export 8760 data like I always use to. The simulation runs and I get the popup saying the file has been created successfully. However, when I go open the file, it's missing all the variables selected. The only thing showing is the header, and the hourly time stamps. All the other columns are empty - not even the header for the variables are shown. Help? Thanks