I'm getting errors that says:
Orientation #2: The area of the 3D fields is lower than the area of the modules defined in the system subarrays.
Orientation #3: The area of the 3D fields is lower than the area of the modules defined in the system subarrays.
But according to the Compatibility with orientation and system parameter section it is exactly the same, as shown on the picture i attached.
And when i press 'system overview' it says like this:
Compatibility between System and Shadings
Orientation #1 tilt/azim = 30° / -22°
2 sub-arrays PNom = 110 kWp, modules area = 521 m²
shading 3D fields 12 tables, total rough area = 521 m²
Orientation #2 tilt/azim = 30° / -22°
2 sub-arrays PNom = 110 kWp, modules area = 521 m²
shading 3D fields No shading 3D fields defined
Orientation #2: The area of the 3D fields is lower than the area of the modules defined in the system subarrays.
Orientation #3 tilt/azim = 30° / -22°
2 sub-arrays PNom = 110 kWp, modules area = 521 m²
shading 3D fields No shading 3D fields defined
Orientation #3: The area of the 3D fields is lower than the area of the modules defined in the system subarrays.
System parameters
6 sub-arrays defined
Sub-array #1 Sub-Array #1
Orientation #1 Tilt/Azimuth = 30.0° / -22.0°
PV modules: 10 strings of 17 modules in series, 170 total
Pnom = 545 Wp PNom array = 93 kWp, area = 438 m²
Inverters (110 kWac) 7 MPPT inputs, Total 86 kWac, Pnom ratio = 1.08
Sub-array #2 Sub-array #2
Orientation #1 Tilt/Azimuth = 30.0° / -22.0°
PV modules: 2 strings of 16 modules in series, 32 total
Pnom = 545 Wp PNom array = 17 kWp, area = 83 m²
Inverters (110 kWac) 2 MPPT inputs, Total 24 kWac, Pnom ratio = 0.71
Sub-array #3 Sub-array #3
Orientation #2 Tilt/Azimuth = 30.0° / -22.0°
PV modules: 10 strings of 17 modules in series, 170 total
Pnom = 545 Wp PNom array = 93 kWp, area = 438 m²
Inverters (110 kWac) 7 MPPT inputs, Total 86 kWac, Pnom ratio = 1.08
Sub-array #4 Sub-array #4
Orientation #2 Tilt/Azimuth = 30.0° / -22.0°
PV modules: 2 strings of 16 modules in series, 32 total
Pnom = 545 Wp PNom array = 17 kWp, area = 83 m²
Inverters (110 kWac) 2 MPPT inputs, Total 24 kWac, Pnom ratio = 0.71
Sub-array #5 Sub-array #5
Orientation #3 Tilt/Azimuth = 30.0° / -22.0°
PV modules: 10 strings of 17 modules in series, 170 total
Pnom = 545 Wp PNom array = 93 kWp, area = 438 m²
Inverters (110 kWac) 7 MPPT inputs, Total 86 kWac, Pnom ratio = 1.08
Sub-array #6 Sub-array #6
Orientation #3 Tilt/Azimuth = 30.0° / -22.0°
PV modules: 2 strings of 16 modules in series, 32 total
Pnom = 545 Wp PNom array = 17 kWp, area = 83 m²
Inverters (110 kWac) 2 MPPT inputs, Total 24 kWac, Pnom ratio = 0.71
3D shadings parameter
12 field(s) defined Total area 1563 m²
Field #1: table Table Row#2 Col#4 Orient.#-2
Total area = 118.6 m²
Orientation #1 Tilt/Azimuth = 30.0° / -22.0°
Field #2: table Table Row#3 Col#4 Orient.#-3
Total area = 118.6 m²
Orientation #1 Tilt/Azimuth = 30.0° / -22.0°
Field #3: table Table Row#2 Col#1 Orient.#-2
Total area = 134.1 m²
Orientation #1 Tilt/Azimuth = 30.0° / -22.0°
Field #4: table Table Row#2 Col#2 Orient.#-2
Total area = 134.1 m²
Orientation #1 Tilt/Azimuth = 30.0° / -22.0°
Field #5: table Table Row#2 Col#3 Orient.#-2
Total area = 134.1 m²
Orientation #1 Tilt/Azimuth = 30.0° / -22.0°
Field #6: table Table Row#3 Col#1 Orient.#-3
Total area = 134.1 m²
Orientation #1 Tilt/Azimuth = 30.0° / -22.0°
Field #7: table Table Row#3 Col#2 Orient.#-3
Total area = 134.1 m²
Orientation #1 Tilt/Azimuth = 30.0° / -22.0°
Field #8: table Table Row#3 Col#3 Orient.#-3
Total area = 134.1 m²
Orientation #1 Tilt/Azimuth = 30.0° / -22.0°
Field #9: table Table Row#1 Col#4 Orient.#-1
Total area = 118.6 m²
Orientation #1 Tilt/Azimuth = 30.0° / -22.0°
Field #10: table Table Row#1 Col#1 Orient.#-1
Total area = 134.1 m²
Orientation #1 Tilt/Azimuth = 30.0° / -22.0°
Field #11: table Table Row#1 Col#2 Orient.#-1
Total area = 134.1 m²
Orientation #1 Tilt/Azimuth = 30.0° / -22.0°
Field #12: table Table Row#1 Col#3 Orient.#-1
Total area = 134.1 m²
Orientation #1 Tilt/Azimuth = 30.0° / -22.0°
Orientation #1 12 tables, Area = 520.9 m²
Orientation #1 12 tables, Area = 520.9 m²
Orientation #1 12 tables, Area = 520.9 m²
Use in simulation: Detailed electrical loss using Module Layout
How to fix this?
