Wanderson Alves
-
Posts
4 -
Joined
-
Last visited
-
unused energy (grid throttling) equal to 0%
Wanderson Alves replied to Wanderson Alves's topic in Problems / Bugs
What could be influencing? -
I am simulating a 240MWn power plant, but limited to 210MWn. The logic would be that in the PVSyst report the loss "Unused energy (grid limitation)" was different from 0%, but this is not happening. What could be influencing this behavior? Below is the print of the properly configured "Grid power limitation" window.
-
I am simulating a plant with a nominal capacity of 240MW. However, the power injected into the grid must be limited to 210MW. By doing this, using the 'Grid power limitation' resource, I noticed that the energy produced by the system obtained a significant increase. Does it make sense to limit the injected power and obtain an increase in energy production? If yes, what is the possible explanation?
-
Estou simulando uma planta com potência nominal de 240MW. Porém, a potência injetada na rede deve ser limitada em 210MW. Ao fazer isso, utilizando o recurso de 'Grid power limitation', percebi que a energia produzida pelo sistema obteve um aumento significativo. Faz sentido limitar a potência injetada e obter aumento na produção de energia? Se sim, qual a possível explicação?
