[Designing with SMA or Huwawei INVERTERS]

Hello,

Im trying to simulate a buliding with 2 orientation only...

in 1 orientation there is 288 panels (455W of ja solar) and i put in 110KW SMA INVERTER in 18 strings of 16 panels each .

In the second orientation there is 304 panels (....) and i put in 110KW SMA INVERTER in 19 strings of 16 panels each.

My problem is that to those inverters there 12 MPPT each BUT when i want to put for example 9 mppt's with 2 strings and 1 mppt with 1 string left ( orient #2) how can i do it???????

because in sma inverters there is the factor of power sharing between his mppt's and there is no any relation to how much strings do i put to each mppt like solaredge designing for example... so HOW COULD I DO IT ACTUALLY?

thx ,

shahaf

[Adding an inverter with 4 MPPT]

Hello.

In continues for the topic of Demian i have a TWO question too...

1. If im using a same inverter with several of sub arrays could i go to the option of OPEN option and go to the ADDITIONAL PARAMETERS tab and choose my multi mppt options and choose some mppts

and in this case i could do power sharing according to the several mppts that i choosed?

2. in this case - each mppt could be different sub array/orientation?

THX ALOT

[Several orientation in a same inverter]

Hello ,

If i have several orientation with different size of strings length - Could I make the inverter as multimppt and power each orientation to a specific mppt???

In this case if i would put the same type of inverter to each sub array that combine on this multimppt inverter??

THX ALOT!!!