shahaf

Hello, Im trying to simulate a buliding with 2 orientation only... in 1 orientation there is 288 panels (455W of ja solar) and i put in 110KW SMA INVERTER in 18 strings of 16 panels each . In the second orientation there is 304 panels (....) and i put in 110KW SMA INVERTER in 19 strings of 16 panels each. My problem is that to those inverters there 12 MPPT each BUT when i want to put for example 9 mppt's with 2 strings and 1 mppt with 1 string left ( orient #2) how can i do it??????? because in sma inverters there is the factor of power sharing between his mppt's and there is no any relation to how much strings do i put to each mppt like solaredge designing for example... so HOW COULD I DO IT ACTUALLY? thx , shahaf

Hello. In continues for the topic of Demian i have a TWO question too... 1. If im using a same inverter with several of sub arrays could i go to the option of OPEN option and go to the ADDITIONAL PARAMETERS tab and choose my multi mppt options and choose some mppts and in this case i could do power sharing according to the several mppts that i choosed? 2. in this case - each mppt could be different sub array/orientation? THX ALOT

Hello , If i have several orientation with different size of strings length - Could I make the inverter as multimppt and power each orientation to a specific mppt??? In this case if i would put the same type of inverter to each sub array that combine on this multimppt inverter?? THX ALOT!!!