Importing Topography from AutoCAD to Shading scene in PVSyst

[Ziad]

Hello , I have a cad file containing contour lines and points of a site, I extracted the data from the cad file into a csv file containing X,Y,Z coordinates of all the points in it and imported it into PVsyst scene as a ground object , but the problem is that when I place the PV tables over it ,some of them are not placed properly

[Muhammed Sarikaya]

Dear Ziad,

Can you also try this feature: Tools → Automatic altitude (see below)?

Select your entire table first, then enable this feature.
On the right, try setting 1 meter or more, choose Lowest point, and click Set automatic altitude.

Let me know if this solves your issue.

Regards,