Electrical Mismatch Losses

[AlexBackCwbBrazil]

Dear @LL , 

Since which version of PVsyst it is presented in the report the correspondent electrical mismatch losses? 

Our doubt is why it is not presented in an report from version 7.2.18 and since it made available by the tool. 

Below some pictures to better ilustrate the question. 

Thanks in advance! 

 

Report that is raising the doubt: 

 

Desired report (example): 

 

Edited Friday at 04:06 PM by AlexBackCwbBrazil

[dtarin]

Electrical shading loss has been around for a long time. It is likely the 7.2 report was run on linear shading, or the site was modeled perfectly flat with backtracking enabled and no shading objects present to cause electrical shading loss.