Module quality - LID Mismatch

[Aidenn]

Hi PVSyst Team,

Can we determine these parameters with the module info alone? I'm using Jinko Solar  - JKM590N-72HL4-BDV and JKM595N-72HL4-BDV/

Please show how do we come up with the values. 

Appreciate your help,

~Aidenn

Edited 13 hours ago by Aidenn

[André Mermoud]

The "Module quality loss" represents the confidence you put yourself in the PV module real performance.

See the help https://www.pvsyst.com/help/project-design/array-and-system-losses/module-quality-losses.html?h=module+quality

The "Light induced degradation" affects only the P-type wafer-based cells. It is sometimes - rarely - mentioned on the datasheets.  

See the help  https://www.pvsyst.com/help/project-design/array-and-system-losses/lid-loss.html?h=lid

The "Module Mismatch loss" depends on the real module characteristics dispersion.

See the Help  https://www.pvsyst.com/help/project-design/array-and-system-losses/array-mismatch-losses/mismatch-loss-due-to-modules-dispersion.html?h=mismatch

 

NB: you have little questionmarks buttons for getting help for each of these losses, please use them.