PVsyst String Configuration and Shading Scene Simulation Issues.

[NFI]

Hello, I’d like to kindly ask a few questions regarding PVsyst. We would be very grateful for your guidance and assistance. Thank you very much!

1. When configuring the system in PVsyst, we find it difficult to adjust the string connections between the inverter and modules. Is there only one way to configure the string arrangement?
2. Additionally, when simulating with a shading scene, is there a more efficient way to adjust the module layout? Currently, we can only roughly place the modules in their default positions.
3. If the string configuration appears correct but the simulation still cannot be executed, how should we proceed to troubleshoot or resolve the issue?

[Muhammed Sarikaya]

Dear NFI,

I don't understand what you mean by "one way to configure the string with inverters."

I invite you to watch this tutorial, which explains well how to configure it:

 

 

Regarding near shading, it can indeed be difficult to place the modules. I suggest trying the zone tools as well.

Also, if you encounter an error message, please send it to us at support@pvsyst.com along with a screenshot, so we can help you solve the problem.

Regards,

[NFI]

Dear Muhammed,

Thank you for your response and guidance. Sorry to trouble you again, but may I ask what the zone tools refer to? And how should they be used? Thank you very much!

[Muhammed Sarikaya]

I invite you to consult our help page regarding this:

https://www.pvsyst.com/help/project-design/shadings/near-shadings-3d-construction/construction-tools/zones-of-tables.html?h=zones+tables