2 Orientations in PVsyst

[emily.denz]

Hello, 

If I have two orientations in my PV system (#1 and #2), how can I assign specific modules from the 3D model to these two orientations? See the screenshot.

I assume this has something to do with the "Field sizing" section and the part below labeled "Orientation #1 and #2."

How should I proceed?

Thank you

[Muhammed Sarikaya]

Dear Emily,

I don't understand what you mean by "how can I assign specific modules from the 3D model to these two orientations."

I also don't understand how you can have 3,480 strings in one orientation and 699 strings in the other when you have defined a total of 35 strings. You must distribute the 35 strings between the two orientations.

I don't know how you defined the 3D scene, but you need to check which modules correspond to which orientation. PVsyst will automatically assign the number of modules based on the orientations you have defined.

Regards,