alsolar Posted February 23, 2014 Share Posted February 23, 2014 I am only able to pick a DAM file on the simulation drop down "meas. data". However I only have MET file. Why am I only limited to DAM file? If so, how can I convert a MET file to DAM file so I can run my simulation?See attached screen shot displaying the only DAM file available on the dropdown that is not related to the site of the project.Thanks,Al Link to comment Share on other sites More sharing options...
André Mermoud Posted February 25, 2014 Share Posted February 25, 2014 This is not the right place for performing PVsyst simulations. You should use (on the main page) : "Project design" / "Grid connected". Here you are in a special tool for the analysis of data measured on a PV system. Link to comment Share on other sites More sharing options...
alsolar Posted February 26, 2014 Author Share Posted February 26, 2014 Thank you. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now