Add battery Dyness

[ionut]

Hello,
Please help me with the introduction of Dyness batteries into the program.
attached are the technical sheets related to the batteries.
Or help me with a video with their manual entry in pVsyst
thank you6694780017d2e49657acca8b_Dyness DH100F Series datasheet-EN.pdf6694780017d2e49657acca8b_Dyness DH100F Series datasheet-EN.pdf662f5b32ef19ff70ce371325_Dyness DH200Y datasheet-EN.pdf

Dyness DH200Y datasheet-EN.pdf Dyness DH100F Series datasheet-EN.pdf Dyness BF100 Series datasheet-EN.pdf 65124aade3f4f88698cc5bea_Dyness DH200F（single） datasheet-EN.pdf 6656fd3d21ac861ab3a3b43b_Dyness PowerStone datasheet-EN-Y.pdf

Edited August 1, 2024 by ionut

[André Mermoud]

PVsyst doesn't treat the integrated storage systems (all-in one hybrid systems). It needs to specify the battery pack, the charging and discharging properties independently.

As I understand, you have datasheets for 2 battery systems: the BF100 series (with 3 different capacities) and the Powerstone.

The Powerstone is an assembly of 15 battery modules, but I really don't understand their definition: the voltage is specified as 512V for 100 Ah. This means an energy storage of  51.2 kWh.  I suspect that there is an error on the datasheet, the voltage should be 51.2 V.

I will include these batteries in the database for the next version of PVsyst.