KTK Posted December 22, 2022 Share Posted December 22, 2022 Hi Guys, I am currently working on a 8 orientation simulation. All orientations were selected manually and system definition also properly defined. When I check orientation management there are no errors. But despite this I get an error stating " Orientation #3: No Shading field defined!" Can you please let me know the reason behind this error? Regards, KTK Link to comment Share on other sites More sharing options...
Stéphane Metz Posted December 22, 2022 Share Posted December 22, 2022 Hi KTK, Indeed, according to your screenshots, it should work. In order to be able to determine what is happening, could you send us your project by email to support@pvsyst.com? Regards, Stéphane M. Link to comment Share on other sites More sharing options...
Stéphane Metz Posted December 22, 2022 Share Posted December 22, 2022 This error is caused because orientations 2 and 3 are very close. To solve your problem, you must decrease the detection threshold in the advanced parameters (Parameter #703), for example 0.1° instead of 0.5°: Link to comment Share on other sites More sharing options...
KTK Posted December 23, 2022 Author Share Posted December 23, 2022 Thanks a lot. The problem was solved by decreasing the detection threshold. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now