The problem I raised has not been improved

[chang0423]

It has been updated to V7.2.10 and the result is still the same. The format of the printed report is the same. Please improve it. Thank you

https://drive.google.com/file/d/1yi1rJOs_Gt_9SsZCSeOANm2eCgeBNb-2/view?usp=sharing

https://drive.google.com/file/d/1R5SYL4Rov_jcXedn9guv3qXsYKgt_CRQ/view?usp=sharing

[Adrien Villoz]

Hi chang0423,

This issue will be solved in next version 7.2.12.

As a quick reminder: the pre-sizing tools are meant only to have a very rough estimate for a system, it is by no means a simulation. Reports generated from the pre-sizing tools should never be used for an actual project.