Inverter Power is Strongly Undersized

[ryanpollard68]

I am getting a red flag for Inverter Power is Strongly Undersized when building a grid tied system with an array to inverter ratio of 1.4 and it is preventing me from running a simulation. I found the hidden setting for inverter power is strongly and slightly oversized but not for the power being undersized. I found settings for the PV Array power being oversized and undersized but changing them has no effect on the inverter red flag. Makes me wonder what they are for. I've looked through the help file and can't find a place where all the hidden parameters are listed together with what they mean. Searching the help file for "undersized" does not give me anything useful for this issue.

Is there a parameter for the inverter power strongly undersized ratio that I can change?

Thanks

[André Mermoud]

The relevant parameter is "Limit overload loss for design" in the Prject's definition (button "Project's Settings").

See the FAQ Can I define a system with highly undersized inverter ?