You are not modeling a full inverter. You have selected to use MPPT inputs, and have selected 1 input, which means you are using 1/2 an inverter; your inverter shows it has 2 MPPT inputs. Set the number of mppt inputs to 2, and you will be modeling with the full inverter capacity. Note that is says "inverter power used" is showing 25kW, not 50kW.
Hi, I am facing the losses being introduced as inverter nominal power loss while using MPPT feature for high Wp rated module say 530Wp. If I simulate it in single subarray by using mixed-orientation or just single subarray modeling complete inverter instead of MPPT feature then this loss is giving me 0%.
Any idea why it is happening? I am using 1000Vdc System String Inverter and 530Wp module.
Question regarding sizing of PV panel and inverter
in Simulations
Posted
Hi, I am facing the losses being introduced as inverter nominal power loss while using MPPT feature for high Wp rated module say 530Wp. If I simulate it in single subarray by using mixed-orientation or just single subarray modeling complete inverter instead of MPPT feature then this loss is giving me 0%.
Any idea why it is happening? I am using 1000Vdc System String Inverter and 530Wp module.