PVsyst's forum

Welcome on PVsyst's forum.
It is currently Tue Oct 22, 2019 1:07 pm

All times are UTC+02:00




Post new topic  Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Tue Oct 08, 2019 10:45 pm 

Joined: Tue Oct 08, 2019 10:15 pm
Posts: 1
Hello,

We're developing a ground-mounted project for a university and it will be around 90' from the side of a baseball/softball field. The school is putting up safety netting to prevent balls from hitting the array, but we want to try to account for shading losses resulting from this netting. Looking for any recommendations on this approach in general, but specifically I was hoping to use the thin object tool to try and approximate our situation. Essentially created a wall near the array and applied the thin object ratio based on the expected amount of string/netting area per solar cell, etc. and used for 'fraction for electrical effect'. It seems this tool was created with overhead lines in mind or otherwise shade coming from above so I'm not sure if this is an appropriate exercise. Any recommendations are much appreciated.

Drew


Top
   
PostPosted: Wed Oct 09, 2019 11:50 pm 
User avatar

Joined: Tue Oct 18, 2016 3:31 am
Posts: 218
Defining a wall will still cause beam loss as a solid object.

The poles holding up the net could be modeled. You can account for shading of netting by adding more support poles as thin objects.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

All times are UTC+02:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited