PVsyst's forum

Welcome on PVsyst's forum.
It is currently Thu Apr 18, 2019 9:15 pm

All times are UTC+02:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Tue Mar 26, 2019 1:13 pm 

Joined: Tue Apr 03, 2018 9:47 am
Posts: 3
Hi Pvsyst,

We found new option of "Irradiance optimization" in Pvsyst 6.7.9 version. However, we didn't found any reference or guidance on how it work ?? and it background methodology ??.
when are not sure when to use this option ??.

Request to provide some details on newly available option "Irradiance optimization" in Project design>Orientation Tab.

Regards,
Pavan


Top
   
PostPosted: Thu Mar 28, 2019 10:01 pm 
User avatar

Joined: Tue Oct 18, 2016 3:31 am
Posts: 177
I am also interested in knowing more about this and where it originated from, how it works, etc.


Last edited by solarguru on Tue Apr 02, 2019 6:51 pm, edited 1 time in total.

Top
   
PostPosted: Sat Mar 30, 2019 5:30 am 

Joined: Fri Feb 02, 2018 10:51 pm
Posts: 6
+1 For an explanation.
Or a warning not to check the new box that gives more energy for free. At least a single sentence, slightly vague, release note to tease us but leave us with more questions, only joking.

Best wishes to all

p.s. Request to also include a nice short video with each software release note to illustrate, visually, confirming what's been changed/why and how to use..and more importantly what old forum/help file information is entirely obsolete.


Top
   
PostPosted: Wed Apr 10, 2019 2:44 am 

Joined: Wed Apr 10, 2019 2:21 am
Posts: 1
Would be nice if an explanation is released with the release notes...


Top
   
PostPosted: Wed Apr 17, 2019 11:40 am 
User avatar

Joined: Mon Apr 16, 2012 7:29 pm
Posts: 1586
The usual tracking strategy defines the tracker's angle in order to minimize the incidence angle for a given sun's position.

This new strategy determines the orientation according to the best irradiance received by the trackers. This may be different than the previous strategy as the transpositon of the diffuse component is proportional to (1 + cos(i) / 2), where i = incidence angle. Therefore the higher tilt, the less transposed irradiance.
For a fully covered weather, the optimal tracker's position will be horizontal (Phi = 0)

In practice on real systems, this strategy may be easily applied by putting 2 irradiance sensors on the tracker, separated by a black wall perpendicular to the tracker: the best orientation is obtained when the measured irradiances are equal.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC+02:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited