PVsyst's forum

Welcome on PVsyst's forum.
It is currently Tue Sep 22, 2020 4:13 am

All times are UTC+02:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Mon Apr 24, 2017 6:48 pm 

Joined: Wed Sep 12, 2012 11:53 pm
Posts: 14
My firm just finished constructed a 17.5 MWP plant a few months ago and we are in the process of analyzing the measured vs PVSyst estimated production data.

Our Scada is giving us the Plane of Array Irradiance (POA) in w/m^2. Which of these PVsyst data is equivalent to the measured POA Irradiance? The "Global Incident in Coll. Plane" or the "Effective Global, Corr. for IAM and Shading"


Top
   
PostPosted: Fri Apr 28, 2017 10:35 pm 
User avatar

Joined: Mon Apr 16, 2012 7:29 pm
Posts: 1680
Your measured value corresponds to the GlobInc value (Incident global), which is just the result of the transposition from horizontal to your tilted plane.
Th GlobEff value (Effective global) is the GlobInc, affected by the optical losses like Far and Linear shadings, IAM and soling losses.


Top
   
PostPosted: Tue Jan 29, 2019 12:04 am 

Joined: Fri Jul 07, 2017 3:27 pm
Posts: 30
It seems to me that GlobEff should be less than GlobHor 100% of the time, because GlobEff includes some losses like IAM and shading. Why would GlobHor be less than GlobEff?


Top
   
PostPosted: Tue Jan 29, 2019 3:22 am 

Joined: Mon Feb 29, 2016 8:02 pm
Posts: 8
GlobHor is irradiance measured in a horizontal plane. GlobInc is the irradiance that hits the actual orientation of your array. This will likely be greater than GlobHor as there are inherent benefits to tracking or installing modules at an angle. GlobEff is GlobInc after all optical losses are applied, as mentioned below.

For example, a single axis tracking system could see a GlobInc boost of 35% because it's facing the sun most of the day (ideally). After all optical losses are applied, the GlobEff boost could still equal 25% when compared to GlobHor.


Top
   
PostPosted: Sun Feb 03, 2019 1:46 am 

Joined: Fri Jan 25, 2019 6:04 am
Posts: 6
Location: Denmark
The Global incident is just the result of the transposition of your meteo data GlobHor to your tilted plane.
With tracking arrays, when using backtracking, this could change when you change the width of the trackers or the pitch between trackers, because the backtracking conditions will vary.

In any other case, the Incident Global has no relationship in any way with the rest of the system, such for example the AC capacity.


Top
   
PostPosted: Mon Apr 01, 2019 10:48 pm 

Joined: Fri Jul 07, 2017 3:27 pm
Posts: 30
Does anybody know how global incident in coll. plane could be negative? That's a new one for me. I just downloaded version 6.7.9, but it was able to successfully run some of my older tracker simulations just fine.


Top
   
PostPosted: Mon Apr 01, 2019 10:59 pm 

Joined: Fri Jul 07, 2017 3:27 pm
Posts: 30
Ah, I just answered my own question. In case anybody else has this issue, I had accidentally tried to track from -45deg to -45deg, which admittedly is not a great idea.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC+02:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited