PVsyst's forum

Welcome on PVsyst's forum.
It is currently Tue Sep 28, 2021 6:09 pm

All times are UTC+02:00

Post new topic  Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Wed Jul 14, 2021 6:02 pm 

Joined: Wed Jul 14, 2021 5:47 pm
Posts: 9
the task of my thesis is to simulate the output power of an existing bifacial one axis solar tracker.This setup uses 36 bifacial solar panels (455W). 1 string consists of 12 modules and each string is connected to 1 MPP of an 8kW SMA Sunny Tripower inverter. When inserting the Inverter at 'System' I get the error message that the array max power is greater than the specified inverter max allowed input PV power. How is it possible that this setup works correctly in real life but gives an error message during a simulation?

PV array 8kW.png
PV array 8kW.png [ 421.77 KiB | Viewed 292 times ]
PostPosted: Mon Jul 19, 2021 9:26 pm 
User avatar

Joined: Tue Oct 18, 2016 3:31 am
Posts: 402
This is not an error. It is letting you know the array is sized higher than the inverter input rating. In the OND file, you likely have the contractual specification checked on the maximum PV power. You can uncheck this to remove the warning. Note you have defined 1.9 inverters in your global system.

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

All times are UTC+02:00

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited