PVsyst's forum

Welcome on PVsyst's forum.
It is currently Mon Aug 03, 2020 10:52 pm

All times are UTC+02:00




Post new topic  Reply to topic  [ 1 post ] 
Author Message
PostPosted: Mon Feb 18, 2013 12:15 pm 
User avatar

Joined: Mon Apr 16, 2012 7:29 pm
Posts: 1658
In PVsyst, the definition of the user's needs is specified in terms of energy.
Now this energy may be used in any way. Either directly by DC appliances, or by AC appliances after an inverter.
The load energy specified in PVsyst is the DC energy before the inverter. If you want to use an inverter you should estimate externally the required DC energy, taking the efficiency and the stand-by losses into account.
In fact the main information expected from the Stand-alone systems simulation is the energy balance between the PV production, the battery storage and the energy use (including a possible genset). The inverter is not an essential point in this evaluation.

An inverter for a stand-alone system is a completely different device than an inverter for grid-connected systems:
- For a grid-connected system, the input performs the MPP tracking on the I/V curve of the PV array; and at any time, the converted power is determined by the suns' availability.
- For a stand-alone system, the input works at fixed-voltage (the battery voltage) with an "unlimited" current or power; the power is according to the instantaneous user's needs.

We have deeply renewed the treatment of the Stand-alone systems for the version 6.40. Inverters devices will be defined soon.
This requires to define a new component type, and the corresponding database.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 1 post ] 

All times are UTC+02:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited