PVsyst's forum

Welcome on PVsyst's forum.
It is currently Thu Jun 24, 2021 10:46 am

All times are UTC+02:00




Post new topic  Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Mon Sep 21, 2020 8:16 pm 

Joined: Mon Sep 21, 2020 7:35 pm
Posts: 2
Hello,

I am planning to use a Y-connector wherein I will be combing two strings in parallel using this and then connecting the string to the inverter input. So effectively in one input I shall be connecting two strings in parallel. This is a standard practice. But I face a problem when I try to put in these as my system parameter in PVsyst.

I am using a 100kW inverter with 9 MPPTs (Sungrow SG110CX) and 355Wp modules. My string configurations are as follows: MPPT 1: 19*3 (two strings are connected using Y-connector), MPPT 2: 18*3 (two strings are connected using Y-connector), MPPT 3, 4 & 5: 20*2 each, MPPT 6: 20*1, MPPT 7: 19*2, MPPT 8: 19*1, MPPT 9: 20*1.

When I try to assign 3 strings into one MPPT input (for MPPT 1 & 2), PVsyst shows an error saying the inverter is strongly undersized since the Pnom ratio becomes 1.72.

I am attaching a screenshot for reference. Please suggest a way to circumvent this problem to simulate the system parameters.

Thanks in advance!


Attachments:
PVsyst Query.png
PVsyst Query.png [ 456.29 KiB | Viewed 2356 times ]
PVsyst Query.png
PVsyst Query.png [ 456.29 KiB | Viewed 2356 times ]
Top
   
PostPosted: Sat Nov 07, 2020 11:26 pm 
User avatar

Joined: Mon Apr 16, 2012 7:29 pm
Posts: 1686
You should use the "Power sharing" option for distributing the available Nominal power ont several MPPT inputs.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

All times are UTC+02:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited