PVsyst's forum

Welcome on PVsyst's forum.
It is currently Fri Dec 13, 2019 9:44 am

All times are UTC+02:00




Post new topic  Reply to topic  [ 1 post ] 
Author Message
PostPosted: Fri Jun 28, 2019 11:49 am 
User avatar

Joined: Mon Apr 16, 2012 7:29 pm
Posts: 1616
Micro-inverters are distributed devices managing usually 1 PV module, sometimes 2 or 4, directly connected to the grid.

Some people are waiting for a big gain of productivity with this configuration.

The maximum gain we can wait with respect to a "normal" system will be:
- A part of the mismatch due to different modules (if 2 or 4 modules in series, there may be still a mismatch between them).
- A part of the shading electrical mismatch loss (to be evaluated with the "Module layout" tool in both cases).

But other features may represent a worst behaviour:

- The wiring loss will be distributed between the DC and the AC parts up to the injection point. With Micro-inverters you have no wiring losses on the DC circuit (or very limited with 2 or 4 modules); but you have AC losses on a long way under 240V. With centralized systems, the DC circuit is usually working at high voltage (500-700V), reducing the wiring loss (for a same wire section) in a part of the distance. The AC loss only concerns the distance between the inverter and the injection point, and may act on a 3-phased circuit (less current).
- Usually a big inverter has a higher efficiency. This has to be included in the comparison.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 1 post ] 

All times are UTC+02:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited