PVsyst's forum

Welcome on PVsyst's forum.
It is currently Sun Sep 19, 2021 4:47 pm

All times are UTC+02:00

Post new topic  Reply to topic  [ 1 post ] 
Author Message
PostPosted: Tue Nov 06, 2012 10:57 am 
User avatar

Joined: Mon Apr 16, 2012 7:29 pm
Posts: 1686
Some practicians - and most of PV module's catalogues - usually specify the NOCT coefficient (Normalized Operating Cell Temperature), which is defined in IEC 61836: it is the temperature attained by a PV module in specific conditions (800 W/m², T=20°C and wind speed=1 m/s), and this for a non-operating situation (open circuit), for a "nude" rack-mounted module with free air ventilation.

Please don't use the NOCT approach, which is very confusing, but define a Heat Loss Factore U [W/m²K] for your PVsyst simulations.

For me the NOCT value for a module is only dependent (slightly) on the cover (glass) and back kind of the module (glass, plastic), and is useless for the module temperature evaluation. This is the reason why I did not include it in the PVsyst parameters.
As a confirmation of this, a team of the NREL in the USA measured side-by-side, at sun during several days, 3 modules with resp. 42.4°C, 49.7°C and 52.3°C NOCT manufacturer's values, and these 3 modules showed exactly the same temperature within 0.3°C !
On the other hand, the NOCT doesn't include any information about the mounting mode (free ventilated, integrated and insulated, etc). It is always given for a "nude" module. Moreover is is defined for open-circuit conditions, i.e. not-operating conditions; this doesn't make sense as the produced energy affects the energy balance.

If you apply the U-value thermal balance equation to the NOCT conditions, you will obtain an equivalence between the U-factor and the NOCT for specific conditions. But this doesn't make much sense, and is very difficult to interpret. Please completely forget the NOCT approach !!!

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 1 post ] 

All times are UTC+02:00

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited