PVsyst's forum

Welcome on PVsyst's forum.
It is currently Sun Sep 20, 2020 12:07 am

All times are UTC+02:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Helios 3D and PVsyst
PostPosted: Wed Sep 19, 2012 1:59 pm 

Joined: Wed Sep 19, 2012 10:38 am
Posts: 1
Hello,

I tried to import a helios project into pvsyst.

And I got the following error message:

"Warning:
The orientation of all planes in the shading scene should be identical. (Here 4 different orientations). (Only with grid systems, if two orientations please choose "Heterogeneous Fields" in the orientation definition parameter)."

Please also see attachment

I don't really understand what this means and how it can be solved. Actually all modules have the same tilt angle an are orietated towards south.

Maybe somenone can help me?

Thanks in advance!!!


Attachments:
untitled.jpg
untitled.jpg [ 56.01 KiB | Viewed 7700 times ]
Top
   
 Post subject: Re: Helios 3D and PVsyst
PostPosted: Sat Sep 29, 2012 8:10 pm 
User avatar

Joined: Mon Apr 16, 2012 7:29 pm
Posts: 1680
When defining and exiting a 3D shading scene, PVsyst checks that it is compatible with the rest of your system.

In your case:
- You have not yet defined the system (modules and inverters)
- In the "Orientation" part you should define a tilt of 22° and an azimuth of around -26°

NB: when developing a new system (calculation version) in PVsyst, you are advised to always begin by a basic system, and then add the complications step by step.
The definition of the 3D scene is a secondary step, it should be done after the definition of the "Orientation" and the "System" parts.


Top
   
 Post subject: Re: Helios 3D and PVsyst
PostPosted: Fri Nov 30, 2012 11:42 pm 

Joined: Fri Nov 30, 2012 11:38 pm
Posts: 1
Hello Andre,

I am having the same issue with PVSYST and Helios 3D.

I get a message that says:

"Warning: The orientation of all planes in the shading scene should be identical. (Here 5 different orientations). (Only with grid systems, if two orientations please choose "Heterogeneous Fields" in the orientation definition parameter)."

After I match the shading areas and adjust the tilt/azimuth, I still get this message.

Any other suggestions for trouble shooting?

Thanks.

Derek


Top
   
 Post subject: Re: Helios 3D and PVsyst
PostPosted: Wed Mar 27, 2013 11:48 am 

Joined: Thu Sep 06, 2012 12:13 pm
Posts: 5
Hello Derek,

Try the following settings - it should work then.


Attachments:
Untitled.png
Untitled.png [ 56.42 KiB | Viewed 7305 times ]
Top
   
 Post subject: Re: Helios 3D and PVsyst
PostPosted: Wed Apr 10, 2013 10:00 pm 
User avatar

Joined: Mon Apr 16, 2012 7:29 pm
Posts: 1680
And in the version 6, these limit angles are defined within the project (button "Albedo - Settings").

In the version 6, you have a tool for analysing the spread of orientations in Helios3D constructions, and the program will choose the orientation average as calculation basis.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC+02:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited