PVsyst's forum

Welcome on PVsyst's forum.
It is currently Thu Oct 29, 2020 1:11 am

All times are UTC+02:00

Post new topic  Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Tue Jun 12, 2018 1:34 pm 

Joined: Tue Jun 12, 2018 1:25 pm
Posts: 1
Dear pvsyst team,

is it possible to define in the system configuration a power limitation in the inverter level ?

for example I want to use STP60-10 by SMA and I must limit the active power to 54 KW, is it possible ?

I have tried to limit it by using Miscellaneous tools' power limitation, however, even if it would have worked OK, it is not correct if I have two orientations.
in addition I have made a CSV file that includes the array AC current and the current shows that it exceeds the limitation ...

sagi sendler

PostPosted: Mon Jun 25, 2018 12:02 am 
User avatar

Joined: Mon Apr 16, 2012 7:29 pm
Posts: 1680
For limiting the power, you have to redefine your inverter ".OND file with a new PNom value.
There is no way in PVsyst for limiting the inverter power (as there is probably no way in your physical inverter for artificialy limiting the power !).

NB: The simulation doesn't check the output maximum current.
If you overcome the specified value, it is probably either because it is not well specified, or your output voltage is too low. PVsyst doesn't manage the grid voltage.

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

All times are UTC+02:00

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited