PVsyst's forum

Welcome on PVsyst's forum.
It is currently Mon Sep 21, 2020 1:52 pm

All times are UTC+02:00




Post new topic  Reply to topic  [ 1 post ] 
Author Message
PostPosted: Thu Jul 20, 2017 8:31 am 

Joined: Thu Jul 20, 2017 8:21 am
Posts: 1
Hi,

I am working on two orientations (specified as -35deg and 55deg in the Orientation Tab).

After the Near Shading Construction I have Shading 3D fields that cannot be be assigned to Orientation #2. Whole scene was rotated to -35deg

I.e. Orientation #1: -35deg - shading fields correspond
Orientation #2: 55deg, but shading field is read as -305deg and this conflicts with the Orientation range which is defined as -180deg to 180deg.

Copied from System Overview:
Orientation #1 Tilt/Azimut = 27.0° / -35.0°
Field #20: rectangular no 20
Total area = 8.0 m²
Orientation #1 Tilt/Azimut = 27.0° / -35.0°
Field #21: rectangular (Multi) Rectangular field no 21
Total area = 42.0 m²
Orientation #-1 Tilt/Azimut = 27.0° / -305.0°
Not matching any definition in the "Orientation" part !
Field #22: rectangular no 22
Total area = 43.9 m²
Orientation #-1 Tilt/Azimut = 27.0° / -305.0°
Not matching any definition in the "Orientation" part !
Field #23: rectangular no 23


Am I missing something simple? :roll:


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 1 post ] 

All times are UTC+02:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited