To follow up on gugel88's post (copied below), does anybody know of any studies in which either
- the fraction for electrical effect for thin objects is defined or
- the shading loss due to a defined thin object is calculated?
Is there any recommendation how to select the best value for thin object depending on the distance of the wire?
At the pylon there are many wires, but not only at a height of 50m, but also at a height of for example 20m.
Will be the electrical mismatch loss at this height as negligible as with 50m height and should I chose 1%?
Or should I chose 5% or anything else then? Would you say that it is a linear dependence on the distance (if the wire diameter stays the same)?