PVsyst's forum

Welcome on PVsyst's forum.
It is currently Tue Sep 25, 2018 9:08 am

All times are UTC+02:00




Post new topic  Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Wed Mar 28, 2018 11:23 am 

Joined: Wed Mar 28, 2018 11:03 am
Posts: 1
Hello,

I have to use this type of modules - Thin film Avancis Powermax 145Wp, Vmpp (60°C) is 40,4V and Voc (-10°C) is 66,3 V - (max 10 pcs) and this type of inverter - Solarmax 6000C, 4,6kW, 90-560V Operating and Input Max Voltage 600V - (2 pcs). Once that I selected them (1 string - 8 modules for instance) the red alarm of "strongly oversized inverter" appears. If I add modules appears the red alarm "the arraay Voc -10°C is greater than the inverter absolute max input Voltage". Why this happens? What I have to change to let it work?

Thanks in advance


Top
   
PostPosted: Tue Apr 17, 2018 9:49 pm 
User avatar

Joined: Mon Apr 16, 2012 7:29 pm
Posts: 1484
You have obviously some limitations in voltage and power when using an inverter. And also some reasonable conditions.

Your array of one string of 8 modules represents 1.16 kWp. This is obviously not suited for an inverter of 4.6 kW. PVsyst puts some reasonable limits.
Now when increasing the number of modules is series, you overcome the voltage limit. You should put several strings in parallel instead.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

All times are UTC+02:00


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited