Bug applying availability in batch mode

[jforbess]

I was running batch mode and examining the reports in saved Calculations, I discovered that though the report lists 0.8% as availability input, it showed 0.0% availability in the loss waterfall for all runs except the first run.

I observed this in 6.37, 6.39 and 6.41. (I don't have 6.38 and 6.40 installed.)

[André Mermoud]

The "Availability" parameter defines periods of Failure (which may be generated randomly if desired)

They could be defined for example by night, therefore leading to no loss.

Please check that in your "Detailed Losses" the failure periods really occur during significant production times.