Nikoloz Posted Wednesday at 08:57 AM Share Posted Wednesday at 08:57 AM Hello. I am in a very difficult situation 🙂 Our customer asked us to make 210 MW project . I have made everything ok . 52 panels on each table, 30grad tilt ,10m pitch. there are more than 360000 panels :)...Now the customer asked me to make simulation with trackers ..And here comes the problem - Is there any option to use Table zones with trackers? . In PVsyst there is only one option... you can use any amount of tables but in one single line. If it is possible to change the zone that I have already filled or make a new zone with trackers ? It is a very big area Link to comment Share on other sites More sharing options...
Nikoloz Posted Wednesday at 09:00 AM Author Share Posted Wednesday at 09:00 AM I am talking about this option Link to comment Share on other sites More sharing options...
Linda Thoren Posted Wednesday at 09:48 AM Share Posted Wednesday at 09:48 AM Yes, make sure you tick the option "Create tracking fields" before filling the zone. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now