Batch simulation results are different from an ordinary simulation and the hourly output

[Doris]

Without changing any setting, I found that key values from a batch simulation, such as EArrNom, EArrMPP, EOutInv, E_Grid, are different from those obtained from an ordinary simulation and those from the hourly output. I tested on two .PRJ and both showed the same. May I know what has gone wrong and which set of values is more reliable?

Edited November 24, 2022 by Doris

[Emanuel Rodriguez]

They shouldn't be so different, could you please share values from ordinary simulation and the CSV files o XLSX from batch simulation?