Trackers at Different Tilt

[dtarin]

Hello,

Is it possible to model a horizontal N-S tracker system in a single shade scene with different tilts? It seems not. If it is indeed not possible, is it something that could be added in the future?

Thank you.

[Solarian]

I think I have the same problem.

 

Count=94

Orientation parameters
Field type:                              Tracking tilted or horiz. N-S axis

Compatibility between System and Shadings
Full system                             Tracking tilted or horiz. N-S axis
     1 sub-array                      PNom = 4809 kWp,  modules area = 25110 m²
     shading 3D fields              158 Tables,      : , total rough area , . 25872 m²

System parameters
Sub-array #1                         PV Array
PV modules:                            452 strings of 28 modules in series, 12656  total
   Pnom = 380 Wp                 Pnom array = 4809 kWp,  Area = 25110 m²
Inverters  (60.0 kWac)          1 MPPT inputs, Total 4020 k   

Shading scene parameters   
38 fields defined                     Total Area  25872 m²
Field #1: 10 trackers              Tracking field4
Tracker area = 171.7 m²       Total area = 1717 m²
Field #2: 3 trackers                Tracking field4.5
Tracker area = 171.7 m²       Total area = 515.1 m²
Field #3: 6 trackers                Tracking field5.1
Tracker area = 171.7 m²       Total area = 1030 m²
Field #4: 2 trackers                Tracking field6.3
Tracker area = 171.7 m²       Total area = 343.4 m²
Field #5: 8 trackers                Tracking field6.3
Tracker area = 171.7 m²       Total area = 1374 m²

 

The numbers near field is the tilt of each tracker.

Error 1

[Solarian]

Hres the field orientation.There are +-2 degree differences between tilts of the tracking planes

Orientation

[dtarin]

There was a previous forum post which said +/- 1 degree would still simulate, but i set my trackers to +0.5/-0.5, and I still received the error.