Multiple modules in 6.67 reports

Multiple modules in 6.67 reports

Postby solarguru » Mon Feb 05, 2018 9:46 pm


It would be helpful if module specific inputs were listed for each module in the PDF report, such as IAM profile, LID, etc. For LID it looks like it gives an average both in the waterfall and in the simulation parameters section on page 1 or 2, which makes it impossible to confirm which test data has been used for each module.

Thank you.
Posts: 95
Joined: Tue Oct 18, 2016 3:31 am

Return to Suggestions